Pol. Ind. Marques de Arlanza Ctra. Castellón km. 4,900, 50013 Zaragoza (España) GPS 41.614665,-0.838961
+34 976 500011 Fax +34 976 500174 comercial@mahezasa.es
| Travels | |
|---|---|
| X axis | 1.120 mm |
| Y axis | 510 mm |
| Z axis | 510 mm |
| Spindle | |
| Spindle nose to table max. / min. | 690 / 180 mm |
| Spindle motor | 11 kW (10 min) / 7,5 kW (30 min) 5,5 kW (continuous operation) |
| Spindle speed | 40 – 7000 min-1 |
| Spindle tapered hole | 7 / 24 Taper no. 40 |
| Feedrates | |
| Rapid feed speed X and Y axis | 24.000 mm/min |
| Rapid feed speed Z axis | 20.000 mm/min |
| Cutting feed speed X, Y and Z axis | 1 – 5.000 mm/min |
| Tool changer | |
| Number of tools accommodated | 24 tool (standard) |
| Tool selection system | Tool holder no. fixed-address system (automatic short cut system) |
| Tool shank | NT-40 |
| Pull stud bolt | Yamazaki made ANSI type |
| Max Ø: Full / Adjacent empty | Ø 80 mm / Ø 110 mm |
| Maximum length | 350 mm |
| Maximum tool weight | 8 Kg |
| Other specifications | |
| Voltage | 380 V / 3 ph |
| Full load | 46 A |
| Noise when cutting | 84 dB |
| Dimensions | |
| Required floor area | 3.000 x 2.990 mm |
| Height | 2.700 mm |
| Weight | 8.850 kg |
Características basadas según ficha técnica.
Las cookies nos permiten ofrecer nuestros servicios. Al utilizar nuestros servicios, aceptas el uso que hacemos de las cookies. Más información.
