Pol. Ind. Marques de Arlanza Ctra. Castellón km. 4,900, 50013 Zaragoza (España) GPS 41.614665,-0.838961
+34 976 500011 Fax +34 976 500174 comercial@mahezasa.es
| COMPOSITION OF THE LINE | |
|---|---|
| 4 u. LONGITUDINAL DECOILERS | |
| Coil max weight | 4.000 kg |
| Coil inner diameter | Ø de 840 a 1.000 mm |
| Coil outer diamenter | Ø de 1.100 a 1.250 mm |
| Coil max height | 2.100 |
| Wire type : Smooth / corrugated | (according to DIN 488) slow-carbon, weldable |
| PULLING AND PRE-STRAIGHTENING UNIT OF LONGITUDINAL WIRES | |
| Wire diameter | Ø 8 – 16 mm |
| Number of worked wires min / max | 2 / 4 |
| Motorization of pulling devices M | 4 motors of 4 kW each one |
| Motorization of rotary devices | 4 motors of 7,5 kW each one |
| ISLA AND STRAIGHTENING OF LONGITUDINAL WIRES | |
| Wire diameter | Ø 8 – 16 mm |
| Max number of worked wires | 4 |
| Number of panels wires straighteners | 8 |
| Number of boxes guide-wire | 4 |
| WELDING UNIT | |
| Number of longitudinal wires min/max | 2 / 4 |
| Longitudinal wires diameters | Ø 8 – 10 – 12 – 14 – 16 mm |
| Trasversal wire diameter | Ø 8 – 10 – 12 mm |
| Wire type : Smooth / corrugated | (according to DIN 488) slow-carbon, weldable |
| Wire mesh length | of 1.500 to 6.000 mm |
| Wire mesh width | of 150 to 1.000 mm |
| Longitudinal wires distance min | 100 mm |
| Transversal wires distance | of 70 to 300 mm |
| Bending radii min / max | 2.000 mm / 20.000 mm |
| Nominal productivity | of 15 to 40 hits/min |
| Welding power | 4 x 200 KVA |
| Welding capacity | 16 mm with 12 mm |
| SHEARED AND BENDING GROUP | |
| Shear max cutting capacity | 4 rounds Ø 16 mm Or 900 N/mm² |
| Max cutting width | 1.300 mm |
| Folding protruding length max / min | 160 / 60 mm |
| Bending angle max / min . | 90º / 45º |
| Folded product width min / max | 300 / 1.000 mm |
| TRANSVERSAL WIRE DECOILER | |
| Coil max weight | 4.000 kg |
| Coil inner diameter | Ø de 840 a 1.000 mm |
| Coil outer diameter | Ø de 1.100 a 1.250 mm |
| Coil max height | 2.100 mm |
| Wire type : Smooth / corrugated | (according to DIN 488) slow-carbon, weldable |
| TRANSVERSAL INTRODUCING DEVICE | |
| Nominal wire shaft | 1.117 mm |
| Trasversal wire diameter | Ø 8 – 10 – 12 mm |
| Devices: Input / Pulling | 2 brushless motors / 4 motorized rollers |
| Pulling rollers max diameter | Ø 207 mm |
| TRANSVERSAL LOADER | |
| Min / max diameter | 8 / 12 mm |
| Load motor | Brushless |
| Transversal shear | Hydraulic |
| Number of positioning | of 15 to 40 hits/min |
| Min / max input length | 150 / 1.300 mm |
Características basadas según ficha técnica.
Las cookies nos permiten ofrecer nuestros servicios. Al utilizar nuestros servicios, aceptas el uso que hacemos de las cookies. Más información.
